<aside>
đź“Ś Model: Black & Decker KX3300T
</aside>
Parts List
- Steam plate
- Hose
- Boiler reservoir
- Carrying bag
How-to-use advice & tips
<aside>
🔌 Using an extension lead?
- Make sure it’s rated for the correct wattage the Wallpaper Stripper requires, which is 2400W
- On the extension lead there should be a number ending in 'W' (Watts) labelled 'MAX LOAD' - make sure this number is greater than the 2400W load of the Wallpaper Stripper!
- You will mostly likely need to unwind the extension lead to achieve this rating - a diagram on the extension lead will indicate this.
- If the extension lead isn’t rated at higher than 2400W it may cut out during use.
</aside>
- Fill the Wallpaper Stripper with water up to the max line mark on the side.
- As the Wallpaper Stripper boils, the water will evaporate and the water level will drop.
<aside>
‼️ Don't let the water level drop below the minimum mark, as this can cause damage to the machine and it may not function properly!
</aside>
- When the water level reaches the minimum mark, unplug the machine, and wait a few minutes for it to cool down.
- Once it’s cooled - being careful not to burn yourself - remove the lid and refill it. We'd recommend wearing rubber gloves to do this.
- Read the Manual for more detailed step-by-step information
Still unsure? Take a look at this video — it’s for a different model but the process is the same!
https://www.youtube.com/watch?v=xT2okVgb1pU
<aside>
📌 Alan’s Pro Tip
It can take up to a day to remove the wallpaper in a whole room - you might want to ask a friend to help!
</aside>
<aside>
⚠️ You will need a scraper to remove the wallpaper after loosening it with the Wallpaper Stripper
</aside>